Incremental Encoder

In order to support twenty first century OEM’s in their determination to maintain a competitive edge we have developed an extensive range of single and dual channel incremental encoders. Both options are available across the major part of the range of dc motors and gearboxes and represent the most cost effective answer to the need for feedback.

Data Sheet NEW Capacitive Encoder 

Data sheet Dual Channel

Data sheet Single Channel

The dual channel incremental encoder is an optical device giving 48 line quadrature output per rev of the motor and 192 positions per rev with signal processing. Operating from a standard 5 volt supply to directly drive TTL and CMOS logic.  Available in two forms, mounted on a motor with rear shaft or mounted between the motor and the gearbox (allowing the customer to select a standard motor).

Dual
Number of Channels: 2
Pulses per Motor rev.: 48
Output: CMOS/TTL
Supply Voltage: 5Vdc
Supply Current: <30mA

The single channel incremental encoder is a magnetic device giving 24 pulses per motor rev. operating from a supply of 3.8 to 30.0 volts. Ideal for use when interfacing with TTL and CMOS devices, this product offers a very cost effective answer to the customer’s feedback requirement when used in conjunction with brushed dc motors and gearboxes.

Single
Number of Channels: 1
Pulses per Motor rev.: 24
Output: CMOS/TTL
Supply Voltage: 3.8-30Vdc
Supply Current: 11mA

Customers should be aware of the opportunity of using the dual channel encoder in conjunction with our programmable controller .  This unique combination when used with the widest range of motor/ gearboxes offers the real opportunity of low cost servo systems.