For the customer that needs a simple timing/control device we offer this widest range of Cam Timers. Up to eight stations with the choice of either synchronous or intrinsically safe pneumatic motors, both drives have extensive gearbox ratio options. This rugged system gives huge flexibility to the OEM designer.

   cam timer image
         

TYPE OEM
Compact electric motor driven interval timer with adjustable cams operating microswitches.

Electrical supply: 12/110/240V, 50/60Hz
Switch rating: 16A 240V change over
Number switches: 1,2
Switch connections: .25" spade terminals
Motor connections: .25" spade terminals
Cycle times:
Seconds: 6,10,15,20
Minutes: 1,2,4,6,10,18,20,30,72
Hours: 2,4,8,12,16,24

 

Data sheet OEM

   Type OEM
         

TYPE D63
Electric motor driven sequential timer. Alloy frame, 0.5” hexagon camshaft with adjustable ratchet lock cams operating replaceable microswitches.

Electrical supply: 12/110/240V, 50/60Hz
Switch rating: 16A 240V change over
Number switches: 2,3,4,5,6,8
Switch connections: .25" spade terminals
Motor connections: .25" spade terminals
Cycle times:
Seconds: 6,10,15,20
Minutes: 1,2,4,6,10,18,20,30,72
Hours: 2,4,8,12,16,24

 

Data sheet D63

   Type D63
         

TYPE HSMP2
Pneumatic motor driven handset timer with adjustable cams operating poppet valves.

Supply pressure: 25 - 100 psi
Valves: Two x 3 Port Poppet valve
Motor connections: 4mm OD push-on
Valve connections: 4mm OD push-on
Cycle times:
Minutes: 1,4,6,10,20,60

 

Data sheet HSMP2

   Type HSMP2
         

TYPE PN63
Pneumatic motor driven continuously cycling camshaft timer. Alloy frame, 0.5” hexagon camshaft with adjustable ratchet lock cams operating lever activated 3/2 spool valves.

Supply pressure: 25 - 100 psi
Valves: KV1643
Number valves: 2,4,5
Motor connections: 4mm push-on
Valve connections: 6mm push in fitting
Cycle times:
Minutes: 1,4,6,10,20,60

 

Data sheet PN63

   Type PN63
         

TYPE GMG
Pneumatic driven motor fitted to diecast gearbox. Moulded enclosure with turbine rotor and centrifugal governor. Ideal for hazardous environments.

Supply pressure: 25 - 100 psi
Motor connections: 4mm push-on
Rotor speed: 1200rpm nominal
Cycle times: 18min – 80rpm

 

Data sheet GMG

   Type GMG